ECM INSTALLATION

INSTALL NO. 2 ECM BRACKET
1. Install the No. 2 ECM bracket with the 2 screws.
  
  Torque:
  
  3.0 N*m { 31 kgf*cm, 27 in.*lbf }
INSTALL NO. 1 ECM BRACKET
1. Install the No. 1 ECM bracket with the 3 screws.
  
  Torque:
  
  3.0 N*m { 31 kgf*cm, 27 in.*lbf }
INSTALL ECM
1. Install the ECM and connect the 2 ECM connectors and lower the 2 levers.
  Note
  
  When connecting a ECM connector, make sure that dirt, water and other foreign matter is not stuck between the ECM connector and ECM.
  
  Make sure that the 2 levers are securely lowered.
2. Attach the 2 wire harness clamps to the No. 1 ECM bracket and No. 2 ECM bracket.
3. Install the 3 bolts to the ECM.
  
  Torque:
  
  5.5 N*m { 56 kgf*cm, 49 in.*lbf }
  
  Note
  
  Do not use an ECM that was dropped or received a strong impact.
4. Return the floor carpet to its original position.
INSTALL FRONT SEAT ASSEMBLY RH
- for Hi-back Seat Type Click here
- for Low-back Seat Type Click here
- for Split Bench Seat Type Click here
INSTALL FRONT DOOR SCUFF PLATE RH
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
INSTALL BATTERY SERVICE HOLE COVER
PERFORM INITIALIZATION

Click here