CRANKSHAFT POSITION SENSOR REMOVAL


  1. REMOVE ENGINE UNDER COVER NO.1 (w/ Engine Under Cover No.1)

  2. SEPARATE VANE PUMP OIL RESERVOIR ASSEMBLY


    1. A01BBMI

      Remove the 2 bolts. Separate the vane pump oil reservoir assembly.

  3. REMOVE CRANKSHAFT POSITION SENSOR


    1. A01BB55

      Disconnect the crankshaft position sensor connector.

    2. Separate the connector from the vacuum pipe No.1.

    3. A01BD2A

      Separate the 3 wire harness clamps.

    4. Remove the bolt and the crankshaft position sensor.