ACCELERATOR PEDAL ROD INSTALLATION


  1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY

    CAUTION:


    • Avoid physical shock to the accelerator pedal.

    • Do not disassemble the accelerator pedal assembly.


    1. A01BHWI

      Install the accelerator pedal with the 2 nuts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the accelerator pedal connector.

  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Torque:
    5.4 N*m  { 54 kgf*cm, 48 in.*lbf }

  3. PERFORM INITIALIZATION


    1. Perform initialization procedures Click here.

      Note

      Certain systems need to be initialized after reconnecting the cable to the negative (-) battery terminal.