ENGINE COOLANT TEMPERATURE SENSOR REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. DRAIN ENGINE COOLANT

    CAUTION:

    Do not remove the radiator cap while the engine and radiator are still hot. Pressurized, hot engine coolant and steam may be released and cause serious burns.


    1. Remove the radiator cap.

    2. Loosen the radiator drain cock plug and a cylinder block drain cock plug. Then drain the coolant.

      A01BC1SE01

  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    1. Disconnect the engine coolant temperature sensor connector.

    2. A01BGLUE01

      Using SST, remove the engine coolant temperature sensor and gasket.

      SST
      09817-33190