ECD SYSTEM (w/o DPF) HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Use these procedures to troubleshoot the ECD system.

  • *: Use the intelligent tester.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. CUSTOMER PROBLEM ANALYSIS


    NEXT

  3. CONNECT INTELLIGENT TESTER TO DLC3*

    Tech Tips

    If the display indicates a communication fault with the tester, inspect the DLC3.


    NEXT

  4. CHECK DTC AND FREEZE FRAME DATA*

    Tech Tips

    Record or print DTCs and freeze frame data if necessary.


    NEXT

  5. CLEAR DTC AND FREEZE FRAME DATA*


    NEXT

  6. CONDUCT VISUAL INSPECTION


    NEXT

  7. SET CHECK MODE DIAGNOSIS*


    NEXT

  8. CONFIRM PROBLEM SYMPTOMS

    Tech Tips

    If the engine does not start, perform steps 10 and 12 first.

    Result
    Result Proceed to
    Malfunction occurs A
    Malfunction does not occur B

    B

    SIMULATE SYMPTOMS
    A

  9. CHECK DTC*

    Result
    Result Proceed to
    Malfunction code A
    No malfunction code B

    B

    Go to step 11
    A

  10. REFER TO DTC CHART*


    NEXT
    Go to step 13

  11. CONDUCT BASIC INSPECTION

    Result
    Result Proceed to
    Malfunctioning parts not confirmed A
    Malfunctioning parts confirmed B

    B

    Go to step 16
    A

  12. REFER TO PROBLEM SYMPTOMS TABLE

    Tech Tips

    Refer to Problem Symptoms Table Click here.

    Result
    Result Proceed to
    Malfunctioning circuit confirmed A
    Malfunctioning parts confirmed B

    B

    Go to step 16
    A

  13. CHECK ECM POWER SOURCE CIRCUIT


    NEXT

  14. CONDUCT CIRCUIT INSPECTION

    Result
    Result Proceed to
    Malfunction not confirmed A
    Malfunction confirmed B

    B

    Go to step 17
    A

  15. CHECK FOR INTERMITTENT PROBLEMS


    NEXT
    Go to step 18

  16. CONDUCT PARTS INSPECTION


    NEXT

  17. IDENTIFY PROBLEM


    NEXT

  18. ADJUST AND/OR REPAIR


    NEXT

  19. CONDUCT CONFIRMATION TEST


    NEXT
    END