| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| No. 1 nozzle holder clamp x Cylinder head | 22 | 220 | 16 | |
| Nozzle leakage pipe assembly x Injector assembly | for injector hollow screw | 16 | 163 | 12 |
| Nozzle leakage pipe assembly x Cylinder head | for union bolt | 13 | 127 | 9 |
| Cylinder head cover sub-assembly x Cylinder head | 9.0 | 92 | 80 in.*lbf | |
| No. 2 injection pipe clamp | 5.0 | 51 | 44 in.*lbf | |
| Injection pipe sub-assembly x Injector assembly and Common rail assembly | 35 | 357 | 26 | |
| Wire harness x Cylinder head cover sub-assembly | for bolt A | 13 | 133 | 10 |
| for bolt B | 9.0 | 92 | 80 in.*lbf | |
| No. 2 nozzle leakage pipe assembly x Intake manifold and Cylinder head | for bolt | 13 | 130 | 9 |
| for union bolt | 21 | 214 | 15 | |
| Vacuum switching valve bracket x Intake manifold | 20 | 204 | 15 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Fuel supply pump assembly x Timing gear case | 21 | 214 | 15 |
| Fuel supply pump assembly x Supply pump gear | 64 | 650 | 47 |
| No. 2 camshaft timing pulley flange and Pump drive shaft pulley x Supply pump gear | 31 | 316 | 23 |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Common rail assembly x Cylinder head | 38 | 387 | 28 | |
| No. 2 injection pipe clamp | 5.0 | 51 | 44 in.*lbf | |
| No. 1 injection pipe clamp x Intake manifold | 5.0 | 51 | 44 in.*lbf | |
| Fuel inlet pipe sub-assembly x Common rail assembly and Fuel supply pump assembly | 35 | 357 | 26 | |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Fuel temperature sensor x Fuel supply pump assembly | 15 (22) | 154 (224) | 11 (16) |
(): For use without SST
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Suction control valve assembly x Fuel supply pump assembly | 9.0 | 92 | 80 in.*lbf | |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Fuel cooler x Floor | 18 | 180 | 13 |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Injector driver bracket x Injector driver | 2.0 | 20 | 18 in.*lbf | |
| Injector driver bracket x Body | 8.0 | 82 | 71 in.*lbf | |
| Battery clamp | for Cold Area Specification Vehicles | 5.4 | 55 | 48 in.*lbf |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Fuel sender gauge assembly x Fuel tank | 4.0 | 41 | 35 in.*lbf |
| Fuel tank band x Body | 38 | 387 | 28 |
| No. 3 parking break cable x Body | 15 | 153 | 11 |