5L-E ENGINE CONTROL SYSTEM SERVICE DATA

ACCELERATOR PEDAL ROD
Tester display Condition Specified Condition
Accel Sens. No.1 Volt % Released 10 to 22%
Depressed 52 to 90%
Accel Sens. No.2 Volt % Released 24 to 40%
Depressed 68 to 95%
CRANKSHAFT POSITION SENSOR
Tester Connection Condition Specified Condition
1 - 2 -10°C (14°F) to 50°C (122°F) 19 to 32 Ω
50°C (122°F) to 100°C (212°F) 24 to 37 Ω
ENGINE COOLANT TEMPERATURE SENSOR
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
INTAKE AIR TEMPERATURE SENSOR
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 2.21 to 2.69 kΩ
MANIFOLD ABSOLUTE PRESSURE SENSOR
Tester Connection Condition Specified Condition
D57-3 (VC) - D57-1 (E) Ignition switch ON 4.75 to 5.25 V
D57-2 (PIM) - D57-1 (E) Ignition switch ON 3.0 to 5.0 V
INTEGRATION RELAY
Item Tester Connection Condition Specified Condition
No. 1 integration relay (EFI MAIN) 10B-1 - 10B-4 Battery voltage not applied to terminals 10B-2 and 10B-3 10 kΩ or higher
Battery voltage applied to terminals 10B-2 and 10B-3 Below 1 Ω
RELAY
Item Tester Connection Condition Specified Condition
No. 2 integration relay (HD-LP NO. 1) d-2 - 12D-3 Battery voltage not applied to terminals d-2 and 12D-4 10 kΩ or higher
Battery voltage applied to terminals d-2 and 12D-4 Below 1 Ω
No. 2 integration relay (DIM NO. 1) 12A-1 - 12C-2 Battery voltage not applied to terminals 12C-3 and 12C-1 10 kΩ or higher
Battery voltage applied to terminals 12C-3 and 12C-1 Below 1 Ω
No. 2 integration relay (HD-LP NO. 2) c-2 - 12B-9 Battery voltage not applied to terminals c-2 and 12B-10 10 kΩ or higher
Battery voltage applied to terminals c-2 and 12B-10 Below 1 Ω
No. 2 integration relay (DIM NO. 2) 12A-1 - 12B-12 Battery voltage not applied to terminals 12B-8 and 12B-11 10 kΩ or higher
Battery voltage applied to terminals 12B-8 and 12B-11 Below 1 Ω
No. 2 integration relay (IG2) 12A-1 - 12D-1 Battery voltage not applied to terminals 12D-2 and 12E-4 10 kΩ or higher
Battery voltage applied to terminals 12D-2 and 12E-4 Below 1 Ω
No. 2 integration relay (DRL) 12A-1 - 12D-6 Battery voltage not applied to terminals 12E-12 and 12D-7 10 kΩ or higher
Battery voltage applied to terminals 12E-12 and 12D-7 Below 1 Ω
No. 2 integration relay (ACC) 12E-7 - 12E-9 Battery voltage not applied to terminals 12E-8 and 12E-4 10 kΩ or higher
Battery voltage applied to terminals 12E-8 and 12E-4 Below 1 Ω
No. 2 integration relay (100V) 12A-1 - 12E-3 Battery voltage not applied to terminals 12E-1 and 12E-4 10 kΩ or higher
Battery voltage applied to terminals 12E-1 and 12E-4 Below 1 Ω
No. 2 integration relay (FR FOG) 12B-3 - 12B-1 Battery voltage not applied to terminals 12B-6 and 12C-4 10 kΩ or higher
Battery voltage applied to terminals 12B-6 and 12C-4 Below 1 Ω
No. 2 integration relay (DOME CUT) 12C-7 - 12C-6 Battery voltage not applied to terminals 12C-8 and 12C-5 10 kΩ or higher
Battery voltage applied to terminals 12C-8 and 12C-5 Below 1 Ω
VENTURI
Item Tester Connection Condition Specified Condition
Throttle control motor 2 - 1, 3 20°C (68°F) 18 to 22 Ω
5 - 4, 6 20°C (68°F) 18 to 22 Ω
VENTURI
Item Throttle valve Specified Condition
Throttle valve switch Fully open Below 1 Ω
Fully close 10 KΩ or higher