FUEL COOLER INSTALLATION


  1. INSTALL FUEL COOLER

    A01BHR8E03

    1. Install the fuel cooler with the 3 bolts.

      Torque:
      18 N*m  { 180 kgf*cm, 13 ft.*lbf }
    2. A01BCLQE03

      Connect the 2 fuel hoses to the fuel cooler.

  2. INSPECT FOR FUEL LEAK


    1. Perform the Active Test.


      1. Connect the intelligent tester to the DLC3.

      2. Turn the ignition switch ON.

      3. Turn the intelligent tester ON.

      4. Select the following menu items: Powertrain / ECD / Active Test.

      5. Perform the Active Test.

        Intelligent Tester Display Test Details Control Range Diagnostic Notes
        Test the Fuel Leak Pressurizes common rail internal fuel pressure, and checks for fuel leaks Stop/Start

        • Fuel pressure inside common rail pressurized to specified value and engine speed increased to 2,000 rpm when ON is selected

        • Above conditions preserved while test is ON