FUEL FILTER REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE FUEL TANK CAP ASSEMBLY

  3. REMOVE FUEL FILTER ELEMENT


    1. A01BD7I

      Disconnect the vacuum switch assembly connector and warning switch connector.

    2. Disconnect the 2 fuel hoses.

    3. Loosen the drain cock and drain fuel.

    4. Tighten the drain cock.

    5. A01BAEJ

      Using a screwdriver as a lever, loosen the fastener nut until it can be loosened by hand.

    6. Fully loosen the fastener nut by hand.

      Tech Tips

      Loosen the fastener until the fuel filter cap assembly can be removed.

      A01BCV1
    7. A01BETW

      To remove the fuel filter cap assembly, pull up one side of the fuel filter cap assembly and then lift it off, as shown in the illustration.

    8. Remove the fuel filter element sub-assembly from the fuel filter case sub-assembly.

    9. Remove the O-ring from the the fuel filter case sub-assembly.