ECM REMOVAL


  1. REMOVE BATTERY SERVICE HOLE COVER

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE FRONT DOOR SCUFF PLATE RH

  4. REMOVE FRONT SEAT ASSEMBLY RH

    Click here

  5. REMOVE ECM


    1. Fold back the floor carpet.

    2. A01BD4D

      Remove the 3 bolts from the ECM.

    3. A01BDIXE01

      Detach the 2 wire harness clamps from the No. 1 ECM bracket and No. 2 ECM bracket.

    4. Raise the 2 levers while pushing the locks on the 2 levers, disconnect the 2 ECM connectors and remove the ECM.

      Text in Illustration
      *a Push
      *b Lock

      Note

      After disconnecting the ECM connector, make sure that dirt, water and other foreign matter does not contact the ECM connector.

  6. REMOVE NO. 1 ECM BRACKET


    1. A01BBKU

      Remove the 3 screws and No. 1 ECM bracket.

  7. REMOVE NO. 2 ECM BRACKET


    1. A01BCQC

      Remove the 2 screws and No. 2 ECM bracket.