TILT CAB STAY (for Single Cab) REMOVAL


  1. CAB HOLD


    1. A01KG9Y

      After tilting the cab up, put the wire on the roof panel of cab.

      Note

      Place the rag on the point contacting the cab in order not to damage.

    2. Tense the wire with the degree of force which does not pull the cab up.

      Note

      Do not pull the cab up.

    3. Using wood, etc., support the cab.

  2. REMOVE FRONT FLOOR SIDE APRON NO. 1 LH


    1. A01KFIR

      Remove the 4 bolts, 2 clips and front floor side apron No. 1.

  3. REMOVE TILT CAB STAY ASSEMBLY


    1. A01KGAZ

      Remove the 4 bolts and tilt cab stay assembly.