FRONT SEAT ASSEMBLY (for Driver Seat LHD) REASSEMBLY


  1. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01KGZHE01

      Install the seat cushion cover LH to the seat cushion pad RH.

    2. Using hog ring pliers, install the seat cushion cover LH with pad with new hog rings "B", as shown in the illustration.

    3. Using hog ring pliers, install the seat cushion cover LH with pad with new hog rings "A", as shown in the illustration.

  2. INSTALL FRONT SEAT TRACK ASSEMBLY INNER LH


    1. Temporarily install rear side of the seat track assembly inner LH to seat cushion assembly LH with the bolt.

    2. Install the front side bolt.

      Torque:
      18.1 N*m  { 185 kgf*cm, 13 ft.*lbf }

    3. Tighten the rear side bolt.

      Torque:
      18.1 N*m  { 185 kgf*cm, 13 ft.*lbf }

  3. INSTALL SEAT TRACK EQUALIZING WIRE SUB-ASSEMBLY RH


    1. Install the seat equalizing wire sub-assembly RH to seat track assembly.

  4. INSTALL FRONT SEAT TRACK ASSEMBLY OUTER LH


    1. Temporarily install rear side of seat track assembly outer LH to seat cushion assembly LH with the bolt.

    2. Install the front side bolt.

      Torque:
      18.1 N*m  { 185 kgf*cm, 13 ft.*lbf }

    3. Tighten the rear side bolt.

      Torque:
      18.1 N*m  { 185 kgf*cm, 13 ft.*lbf }

  5. INSTALL LUMBAR SUPPORT ADJUSTER ASSEMBLY LH (W/ LUMBAR SUPPORT)


    1. Install the lumbar support adjuster assembly LH to seat back spring assembly LH with the 2 bolts.

      Torque:
      7.2 N*m  { 73.5 kgf*cm, 64 in.*lbf }

  6. INSTALL RECLINING SEAT BACK ADJUSTER ASSEMBLY LH


    1. Install the reclining seat back adjuster assembly LH to seat back spring assembly LH with the 2 bolts.

      Torque:
      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }

  7. INSTALL SEPARATE TYPE FRONT SEAT BACK COVER


    1. A01KHLTE01

      Install the seat back cover LH to the seat back pad LH.

    2. Using hog ring pliers, install the seat back cover LH with pad with new hog rings "B", as shown in the illustration.

    3. Using hog ring pliers, install the seat back cover LH with pad with new hog rings "A", as shown in the illustration.

  8. INSTALL LUMBAR SUPPORT LEVER (W/ LUMBAR SUPPORT)


    1. A01KEVAE01

      Install the snap ring to lumbar support lever.

    2. Install the lumbar support lever to seat back assembly LH, as shown in the illustration.

  9. INSTALL FRONT SEAT BACK ASSEMBLY LH


    1. Install the bush to the seat back assembly LH.

    2. Install the seat back assembly LH with the 2 bolts and nut.

      Torque:
      Bolt
      40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }
      Nut
      12.7 N*m  { 130 kgf*cm, 9 ft.*lbf }

  10. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

    Torque:
    40.2 N*m  { 410 kgf*cm, 30 ft.*lbf }