OUTER MIRROR COVER (for RH Side) INSTALLATION


  1. INSTALL FR WIPER ARM RH (for RHD)


    1. A01KI2ZE02
      Text in Illustration
      *1 Wire Brush
      *a Wiper Pivot Serration

      Clean the wiper pivot serrations with a wire brush.

    2. A01KGJEE02

      Install the front wiper arm RH to the position shown in the illustration with the nut.

      Installation Position
      Area Measurement
      A

      40 to 60 mm

      (1.575 to 2.362 in.)
      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      Installation should be performed in the automatic stop position.

    3. Operate the wiper, check that the windshield moulding and the wiper blade do not interfere with each other.

  2. INSTALL FR WIPER ARM LH (for LHD)


    1. A01KI2ZE02
      Text in Illustration
      *1 Wire Brush
      *a Wiper Pivot Serration

      Clean the wiper pivot serrations with a wire brush.

    2. A01KGO9E01

      Install the front wiper arm to the position shown in the illustration with the nut.

      Installation Position
      Area Measurement
      A

      40 to 60 mm

      (1.575 to 2.362 in.)
      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      Installation should be performed in the automatic stop position.

    3. Operate the wiper, check that the windshield moulding and the wiper blade do not interfere with each other.