OUTER MIRROR COVER (for RH Side) INSTALLATION


  1. INSTALL FR WIPER ARM RH (RHD STEERING POSITION TYPE)


    1. A01KI2ZE01
      Text in Illustration
      *a Serration Of Wiper Pivot

      Clean the serration of wiper pivot with wire-brush.

    2. A01KGJEE01

      Install the FR wiper arm RH with a not so that the FR wiper blade will be the position shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Installation should be performed in the automatic stop position.

    3. Operate the wiper, check that the windshield moulding and the wiper blade do not interfere with each other.

  2. INSTALL FR WIPER ARM LH (LHD STEERING POSITION TYPE)


    1. A01KFTDE01
      Text in Illustration
      *a Serration Of Wiper Pivot

      Clean the serration of wiper pivot with wire-brush.

    2. A01KFQB

      Install the FR wiper arm RH with a not so that the FR wiper blade will be the position shown in the illustration.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

      Note

      Installation should be performed in the automatic stop position.

    3. Operate the wiper, check that the windshield moulding and the wiper blade do not interfere with each other.