AUDIO AND VISUAL SYSTEM Illumination Circuit

WIRING DIAGRAM

A01KF6IE02

INSPECTION PROCEDURE

PROCEDURE


  1. INSPECT RADIO RECEIVER ASSEMBLY (ILL+)


    1. A01KFVVE01

      Remove the radio receiver assembly with connectors still connected.

    2. Check voltage.


      1. Measure voltage between terminal ILL+ and GND of radio receiver assembly when head lamp dimmer switch is turned to TAIL position.

        Standard
        10 - 14 V

    OK

    CHECK AND REPLACE RADIO RECEIVER ASSEMBLY

    NG

    REPAIR OR REPLACE HARNESS OR CONNECTOR