METER / GAUGE SYSTEM (for 1KD-FTV) SYSTEM DESCRIPTION


  1. OUTLINE OF THE COMBINATION METER ASSEMBLY

    A01KFWVE03
    Text in Illustration
    *1 Fuel Receiver Gauge *2 Speedometer
    *3 Engine Coolant Temperature Receiver Gauge *4 ODO/TRIP Meter
    *5

    Tachometer

    (w/ Tachometer)

    		 - -
    Meter/Gauge
    Item Signal Description
    Speedometer Indicates vehicle speed based on signals received from speedometer sensor (Direct line)
    Tachometer* Indicates engine speed based on signals from ECM (Direct line)
    Fuel Gauge Indicates fuel level in accordance with signals received from fuel sender gauge (Direct line)
    Engine Coolant Temperature Gauge Indicates engine coolant temperature based on signals from ECM (Direct line)
    ODO/TRIP Meter Calculates accumulated total vehicle travel distance and vehicle travel distance since trip meter knob pressed

    *: w/ Tachometer

    Warning/Indicator
    Item Signal Description
    TURN SIGNAL Receives turn signal from flasher relay (Direct line)
    BEAM Receives beam signal from headlight dimmer switch (Direct line)
    CHARGE Receives malfunction signal from generator (alternator) (Direct line)
    MIL Receives malfunction signal from ECM (Direct line)
    BRAKE Receives parking brake on signal from parking brake switch (Direct line), fluid level warning signal from brake fluid level warning switch (Direct line) and brake vacuum warning signal from brake vacuum warning switch (Direct line)
    OIL PRESSURE Receives engine oil pressure warning signal from engine oil pressure switch assembly (Direct line)
    AIR BAG *1 Receives malfunction signal from airbag ECU assembly (Direct line)

    ABS*2

    		 Receives malfunction signal from skid control ECU (Direct line)
    GLOW Receives glow signal from ECM (Direct line)
    OIL LEVEL Receives engine oil level low signal from engine oil level warning switch (Direct line)
    OIL CHANGE *3 Combination meter assembly determines indicator operation based on the oil contamination condition signal from ECM and the accumulated run distance since previous oil change.
    FUEL LEVEL Receives fuel level low signal from fuel sender gauge (Direct line)
    SEDIMENT Receives sedimenter signal from fuel sedimenter switch (Direct line)
    T-BELT Combination meter assembly determines indicator operation based on accumulated ODO data and T-BELT setting.

    *1: w/ Airbag System

    *2: w/ ABS

    *3: w/ Heater