REMOVE CLEARANCE LAMP LENS & BODY LH
| *a | Pin |
| *b | Claw |
Remove the screw.
Pull out the clearance light lens & body LH forward, then disconnect the pin of body side.
Disconnect the connectors.
REMOVE CLEARANCE LAMP LENS & BODY RH
| *a | Pin |
| *b | Claw |
Remove the screw.
Pull out the clearance light lens & body LH forward, then disconnect the pin of body side.
Disconnect the connectors.
REMOVE FRONT WIPER ARM HEAD CAP
REMOVE FR WIPER ARM LH
Remove the nut and FR wiper arm LH.
REMOVE FR WIPER ARM RH
Remove the nut and FR wiper arm RH.
REMOVE FRONT WASHER NOZZLE HOLDER
Remove the nut and front washer nozzle holder.
REMOVE FRONT VALANCE PANEL LH (RHD STEERING POSITION TYPE)
Tech Tips
Installation is in the reverse order of removal. But, the installation is indicated only when it has a point.
In the RH side, work in the same procedure as in the LH side.
Remove the outer rear view mirror assembly LH.
Remove the clearance lamp lens & body LH.
Remove the outer mirror grommet as shown in the illustration.
Using a screwdriver, remove the outer mirror bezel.
Tech Tips
Tape the screwdriver tip before use.
Using a screwdriver, remove the outer mirror cover LH.
Tech Tips
Tape the screwdriver tip before use.
Remove the 4 bolts and outer rear view mirror assembly LH.
REMOVE FRONT VALANCE PANEL RH (LHD STEERING POSITION TYPE)
Tech Tips
Installation is in the reverse order of removal. But, the installation is indicated only when it has a point.
In the RH side, work in the same procedure as in the LH side.
Remove the outer rear view mirror assembly LH.
Remove the screw and using a screwdriver, remove the outer mirror cover LH.
Tech Tips
Tape the screwdriver tip before use.
Remove the 3 bolts, 2 nuts and outer rear view mirror assembly LH.
REMOVE OUTER MIRROR GROMMET
REMOVE OUTER MIRROR BEZEL
REMOVE OUTER MIRROR COVER LH
REMOVE FRONT PANEL COVER SUB-ASSEMBLY
| *a | Clip |
Remove the 8 clips.
Pull out the front panel cover sub-assembly.
REMOVE FRONT WIPER MOTOR & BRACKET ASSEMBLY
Turn the boot.
Remove the wiper link assembly from front wiper motor & bracket assembly.
Remove the 4 bolts and front wiper motor & bracket assembly.