DAYTIME RUNNING LIGHT RELAY ON-VEHICLE INSPECTION


  1. RUNNING LIGHT RELAY


    1. A01KEKJ

      Inspect running light relay.


      1. Disconnect the connector from the relay and inspect the connector on wire harness side, as shown in the chart.

        Tester connection Condition Specified condition
        2 - Ground Light control switch OFF No continuity
        2 - Ground Light control switch TAIL or HEAD Continuity
        4 - Ground Light control switch OFF No continuity
        4 - Ground Light control switch TAIL or HEAD Continuity
        6 - Ground Headlight dimmer switch FLASH Continuity
        7 - Ground Light control switch OFF No continuity
        7 - Ground Light control switch TAIL Continuity
        10 - Ground Constant Continuity
        13 - Ground Headlight dimmer switch FLASH or HI Continuity
        13 - Ground Headlight dimmer switch FLASH or HI Continuity
        3 - Ground Constant Battery positive voltage
        8 - Ground Ignition switch OFF No voltage
        8 - Ground Ignition switch ON Battery positive voltage
        9 - Ground Terminal 3 ground Battery positive voltage
        11 - Ground Rear fog light switch ON, terminal 3 ground Battery positive voltage
        12 - Ground Constant Battery positive voltage
        14 - Ground Terminal 5 ground Battery positive voltage