HEADLIGHT DIMMER SWITCH (for Turn Signal Switch) REMOVAL


  1. SEPARATE BATTERY NEGATIVE TERMINAL

  2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  3. REMOVE HORN BUTTON ASSEMBLY (W/ SRS AIRBAG)


    1. A01KI41

      Place the front wheels facing straight ahead.

    2. Using a torx socket wrench (T30), loosen the 2 torx screws until the groove along the screw circumference catches on the screw case.

    3. A01KEOU

      Pull out the wheel pad from the horn button assembly.

    4. Disconnect the airbag connector and horn connector and remove the horn button assembly.

  4. REMOVE HORN BUTTON ASSEMBLY (W/O SRS AIRBAG)

    A01KHLWE01
    Text in Illustration
    *A Non-Tilt Column Assembly
    *B Tilt Column Assembly

    1. Non-Tilt Column Assembly:


      1. Remove the 2 screws and horn button assembly.

      2. Disconnect the horn button connector.

    2. Tilt Column Assembly:


      1. Remove the screw and horn button assembly.

      2. Disconnect the horn button connector.

  5. REMOVE STEERING WHEEL ASSEMBLY


    1. Remove the steering wheel assembly set nut.

    2. A01KEXXE01
      Text in Illustration
      *a Matchmark

      Place matchmarks on the steering wheel assembly and main shaft assembly.

    3. Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05010, 09954-05021 )

  6. REMOVE STEERING COLUMN COVER LWR

    A01KHSI

    1. Remove the clip, 2 screws and steering column cover LWR.

  7. REMOVE STEERING COLUMN COVER UPR

    A01KFDF

    1. Remove the 2 screws and steering column cover UPR.

  8. REMOVE TURN SIGNAL SWITCH ASSEMBLY

    A01KF28

    1. Disconnect the connectors and wire harness clamps.

    2. A01KGRY

      Remove the 4 screws and turn signal switch assembly.

  9. REMOVE SPIRAL CABLE SUB-ASSEMBLY


    1. A01KHI8E01
      Text in Illustration
      *1 Cord Clamp

      Remove the 3 screws, separate the headlamp dimmer switch assembly from the turn signal switch assembly.

    2. Remove the 4 screws, connector and cord clamp, separate the spiral cable sub-assembly from the turn signal switch assembly.

    3. A01KI6PE01
      Text in Illustration
      *1 Vinyl Tape
      *2 Wire harness Clamp

      Remove the 2 wire harness clamps and vinyl tape then remove the spiral cable sub-assembly.

  10. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01KH4V

      Remove the code clamp.

    2. A01KGNK

      Remove the 3 screws.

    3. Release the headlight dimmer switch assembly from combination switch assembly.

    4. A01KIIB

      Remove the 3 screws and windshield wiper switch assembly.

  11. REMOVE TURN SIGNAL SWITCH


    1. A01KG1K

      Remove the 2 screws.

    2. A01KGK8

      Remove 2 wire harness clamps and tape. (w/o SRS airbag)

    3. A01KIES

      Remove 2 wire harness clamps and 2 tapes. (w/ SRS airbag)

    4. A01KHEX

      Release lock from connector.

    5. A01KGG2

      Using a precision screwdriver, unlock the connector terminals.

    6. Pull out the connector terminals and remove the headlight dimmer switch.