FRONT AIRBAG SENSOR ON-VEHICLE INSPECTION


  1. AIRBAG SENSOR ASSEMBLY NO. 2 (VEHICLE NOT INVOLVED IN COLLISION)


    1. A01KH69

      Do a diagnostic system check Click here.

  2. AIRBAG SENSOR ASSEMBLY NO. 2 (VEHICLE INVOLVED IN COLLISION)


    1. Do a diagnostic system check Click here.

    2. If the front bumper of the vehicle or its periphery is damaged, do a visual check for damage to the airbag sensor assembly No. 2, which includes the following items even if the airbag was not deployed:


      • A01KGGL

        Bracket deformation

      • Paint peeling off the bracket

      • Cracks, dents or chips in the case

      • Cracks, dents, chipping and scratches in the connector

      • Peeling off of the label or damage to the serial number

  3. WIRE HARNESS AND CONNECTOR (VEHICLE NOT INVOLVED IN COLLISION)


    1. Do a diagnostic system check Click here.

  4. WIRE HARNESS AND CONNECTOR (VEHICLE INVOLVED IN COLLISION)


    1. Do a diagnostic system check Click here.

    2. Check breaks in all wires of the SRS wire harness, and exposed conductors.

    3. Check to see if the SRS wire harness connectors are cracked or chipped.

      Tech Tips

      The SRS wire harness is integrated with the instrument panel wire harness assembly. All the connectors in the system are a standard yellow color.