SPIRAL CABLE REMOVAL


  1. PRECAUTION

    Click here.

  2. SEPARATE BATTERY NEGATIVE TERMINAL

    Click here.

  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

  4. REMOVE HORN BUTTON ASSEMBLY

    Click here

  5. REMOVE STEERING WHEEL ASSEMBLY


    1. Remove the steering wheel assembly set nut.

    2. A01KEXXE01
      Text in Illustration
      *a Matchmark

      Place matchmarks on the steering wheel assembly and main shaft assembly.

    3. Using SST, remove the steering wheel assembly.

      SST
      09950-50013   ( 09951-05010, 09952-05010, 09953-05010, 09954-05021 )

  6. REMOVE STEERING COLUMN COVER UPR

    A01KFDF

    1. Remove the 2 screws and steering column cover UPR.

  7. REMOVE STEERING COLUMN COVER LWR

    A01KHSI

    1. Remove the clip, 2 screws and steering column cover LWR.

  8. REMOVE TURN SIGNAL SWITCH ASSEMBLY

    A01KF28

    1. Disconnect the connectors and wire harness clamps.

    2. A01KGRY

      Remove the 4 screws and turn signal switch assembly.

  9. REMOVE SPIRAL CABLE SUB-ASSEMBLY


    1. A01KHI8E01
      Text in Illustration
      *1 Cord Clamp

      Remove the 3 screws, separate the headlamp dimmer switch assembly from the turn signal switch assembly.

    2. Remove the 4 screws, connector and cord clamp, separate the spiral cable sub-assembly from the turn signal switch assembly.

    3. A01KI6PE01
      Text in Illustration
      *1 Vinyl Tape
      *2 Wire harness Clamp

      Remove the 2 wire harness clamps and vinyl tape then remove the spiral cable sub-assembly.

  10. INSPECT SPIRAL CABLE SUB-ASSEMBLY