FRONT SEAT OUTER BELT ASSEMBLY DISPOSAL


  1. DISPOSE OF FRONT SEAT BELT (WHEN SCRAPPING VEHICLE DEPLOYMENT METHOD)

    A01KGBUE13
    Text in Illustration
    *a Battery

    Tech Tips

    Check battery voltage is above 12 V.


    1. A01KH09E01

      Check functioning of SST.

      SST
      09082-00700
      09082-00740

      CAUTION:

      When activating the seat belt pretensioner, always use a specified SST.


      1. A01KGBUE13
        Text in Illustration
        *a Battery

        Connect the SST to the battery. Connect the red clip of the SST to the battery positive (+) terminal and the black clip to the battery negative (-) terminal.

        Tech Tips

        Do not connect the yellow connector which will be connected to the seat belt pretensioner.

      2. A01KF2EE01

        Check functioning of SST. Press the SST activation switch, and check the LED of the SST activation switch lights up.

        CAUTION:

        If the LED lights up when the activation switch is not pressed, the SST probably malfunctions, so definitely do not use the SST.

    2. Disconnect the pretensioner connector.


      1. Remove the front door scuff plate.

      2. Remove the quarter trim panel.

      3. A01KGJK

        Disconnect the pretensioner connector as shown in the illustration.

    3. Install the SST.


      1. Install the floor anchor of the seat belt.

      2. A01KEM5E01

        Connect the 2 SST, then connect them to the seat belt pretensioner.

        SST
        09082-00700
        09082-00740

        Note

        To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.

      3. A01KFS3E11
        Text in Illustration
        *a 10 m(33 ft) or more

        Move the SST to at least 10 m (33 ft) away from the front of the vehicle.

      4. Close all the doors and windows of the vehicle.

        Note

        Take care not to damage the SST wire harness.

      5. Connect the SST red clip to the battery positive (+) terminal and the black clip to the negative (-) terminal.

    4. Activate the seat belt pretensioner.


      1. Confirm that no one is inside the vehicle or within 10 m (33 ft) area around the vehicle.

      2. Press the SST activation switch and activate the seat belt pretensioner.

        Tech Tips

        The seat belt pretensioner operates simultaneously with the LED of the SST activation switch lighting up.

    5. Dispose of the front seat outer belt (with seat belt pretensioner).

      Tech Tips

      When scrapping a vehicle, activate the seat belt pretensioner and scrap the vehicle with activated front seat outer belt being installed.

  2. DISPOSE OF FRONT SEAT BELT (WHEN DISPOSING OF AIRBAG ASSEMBLY DEPLOYMENT METHOD)

    Note


    • When disposing of a front seat outer belt (with seat belt pretensioner) only, never use the customer's vehicle to activate the seat belt pretensioner.

    • Be sure to follow the procedure given on the next page when activating the seat belt pretensioner.


    1. Remove the front seat outer belt.

      Tech Tips

      Cut the belt near the seat belt retractor.

    2. A01KGBUE13
      Text in Illustration
      *a Battery

      Check functioning of SST (See step 1-(a)).

      SST
      09082-00700
      09082-00740
    3. A01KHZ6E01

      Install the SST.


      1. Connect the 2 SST, then connect them to the seat belt pretensioner.

        SST
        09082-00700
        09082-00740

        Note

        To avoid damaging the SST connector and wire harness, do not lock the secondary lock of the twin lock.

      2. A01KFJZE01

        Place the front seat outer belt on the ground and cover it with the disc wheel with tire.

        Note

        Place the front seat outer belt as shown in the illustration.

      3. Move the SST at least 10 m (33 ft) away from the disc wheel.

        Note

        Take care not to damage the SST wire harness.

    4. A01KHMAE12
      Text in Illustration
      *a 10 m(33 ft) or more

      Activate the seat belt pretensioner.


      1. Connect the SST red clip to the battery positive (+) terminal and black clip to the battery negative (-) terminal.

      2. Check that no one is within 10 m (33 ft) area around the disc wheel.

      3. Press the SST activation switch and activate the seat belt pretensioner.

        Tech Tips

        The seat belt pretensioner operates simultaneously with the LED of the SST activation switch lighting up.

    5. A01KFIY

      Dispose of the front seat outer belt (with seat belt pretensioner).


      1. Remove the disc wheel and SST.

      2. Place the front seat outer belt in a vinyl bag, tie the end tightly and dispose of it in the same way as other general parts.