FRONT SEAT OUTER BELT ASSEMBLY INSTALLATION


  1. INSPECT FRONT SEAT BELT


    1. A01KG9T

      Make sure tat the bolt can be pulled out at 15 degrees or less of tilt.

    2. Make sure that the belt can not be pulled out at over 45 degrees of tilt.

  2. INSTALL FRONT SEAT OUTER BELT ASSEMBLY RH


    1. Install the front seat outer belt assembly outer RH with the bolt (w/o SRS air bag).

      Torque:
      42 N*m  { 420 kgf*cm, 30 ft.*lbf }

    2. Install the front seat outer belt assembly outer RH with the 2 bolts (w/ SRS air bag).

      Torque:
      Upper bolt
      8.5 N*m  { 85 kgf*cm, 74 in.*lbf }
      Lower bolt
      42 N*m  { 420 kgf*cm, 30 ft.*lbf }

    3. Install the shoulder anchor bolt and shoulder anchor cover.

      Torque:
      42 N*m  { 420 kgf*cm, 30 ft.*lbf }
    4. A01KEWEE02

      Install the floor anchor with the bolt, as shown in the illustration.

      Torque:
      42 N*m  { 420 kgf*cm, 30 ft.*lbf }

    5. Connect the pretensioner connector (w/ SRS air bag).

    6. Check the ELR lock.


      1. Check that the seat belt is locked when the seat belt is pulled out quickly with the seat belt installed with the vehicle.

  3. INSTALL FRONT SEAT OUTER BELT ASSEMBLY LH

  4. INSPECT SRS WARNING LIGHT (W/ SRS AIRBAG)