BLOWER UNIT REMOVAL

REMOVE RADIATOR GRILLE
1. Text in Illustration
  
  *a Clip
  
  Remove the screw and 9 clips and radiator grille.
REMOVE CLEARANCE LAMP LENS & BODY LH (for LHD)
1. Text in Illustration
  
  *a Pin
  
  *b Claw
  
  Remove the screw.
2. Pull out the clearance light lens & body LH forward, then disconnect the pin of body side.
3. Disconnect the connectors.
REMOVE HEADLAMP UNIT ASSEMBLY LH
1. Remove the 3 screws.
2. Text in Illustration
  
  *a Claw
  
  Release the 4 claws.
3. Disconnect connectors.
4. Pull out the headlight assembly LH forward and remove the headlight assembly LH.
5. Remove the socket cover.
6. Release the set spring, remove the headlight bulb No.1.
REMOVE HEATER AIR FILTER
REFRIGERANT FROM REFRIGERATION SYSTEM
DISCONNECT COOLER REFRIGERANT SUCTION HOSE
DISCONNECT LIQUID HOSE A
REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
1. Text in Illustration
  
  *a 2 Claws
  
  Remove the 5 screws<D>.
2. Disengage the 2 claws and remove the glove compartment door assembly.
REMOVE INSTRUMENT COVER LWR (for Wide Body)
REMOVE INSTRUMENT COVER LOWER CENTER
REMOVE WINDSHIELD WASHER JAR ASSEMBLY
1. Remove the 2 bolts and the windshield washer jar.
2. Disconnect the hose and connector from the washer pump.
REMOVE COOLER UNIT ASSEMBLY
REMOVE NO.1 AIR DUCT SUB-ASSEMBLY (for Wide Body)
DISCONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY
1. Text in Illustration
  
  *a Clamp
  
  Disconnect the outer cable from the clamp.
2. Remove the inner cable.
REMOVE FRONT HEATER BLOWER ASSEMBLY
1. Disconnect the heater blower motor connector.
2. Disconnect the 2 connector holders from the heater blower.
3. Remove the 3 bolts, nut and front heater blower assembly.
  
  Tech Tips
  
  The nut is inside the heater air filter.

Text in Illustration
*a	Pin
*b	Claw