PARKING BRAKE CABLE (for Rear Wheel Parking Brake) INSTALLATION


  1. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.3


    1. Connect the parking brake cable No.3 to the parking brake equalizer with hole pin and clip.

    2. Connect the parking brake cable No.3 to the rear brake shoe back plate with 2 bolts.

      Torque:
      13.3 N*m  { 136 kgf*cm, 11 ft.*lbf }

    3. Install the clamp and clips.

  2. INSTALL REAR BRAKE SHOE

  3. INSTALL STRUT SET,PARKING BRAKE SHOE,LH

  4. INSTALL FRONT BRAKE SHOE

  5. CHECK REAR DRUM BRAKE INSTALLATION

  6. INSTALL REAR BRAKE DRUM

  7. INSTALL PARKING BRAKE CABLE ASSEMBLY NO.1


    1. Connect the parking brake cable No.1 to the parking brake equalizer with hole pin and clip.

    2. A01KH6B

      Connect the parking brake cable No.1 to the floor panel with 2 bolts.

      Torque:
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

    3. Install clamp and clips.

  8. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY (A/T TRANSMISSION)

  9. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SHIFT (M/T TRANSMISSION)

  10. CONNECT FLOOR SHIFT CABLE TRANSMISSION CONTROL SELECT (M/T TRANSMISSION)

  11. INSTALL PARKING BRAKE LEVER ASSEMBLY


    1. Connect the parking brake cable No.1 to the parking brake lever.

    2. Install the 2 bolts and parking brake lever.

      Torque:
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

    3. Connect the parking brake switch connector.

  12. INSPECT REAR DRUM BRAKE SHOE CLEARANCE

  13. INSTALL REAR WHEEL

  14. INSPECT AND ADJUST PARKING BRAKE LEVER TRAVEL

  15. INSTALL PARKING BRAKE HOLE COVER

  16. INSTALL SHIFT LEVER HOLE COVER

  17. INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY

  18. INSTALL FLOOR SHIFT SHIFT LEVER KNOB SUB-ASSEMBLY