PARKING BRAKE LEVER INSTALLATION

INSTALL PARKING BRAKE SWITCH ASSEMBLY
INSTALL PARKING BRAKE LEVER ASSEMBLY
1. Connect the parking brake cable No.1 to the parking brake lever.
2. Install the 2 bolts and parking brake lever.
  
  Torque:
  
  18 N*m { 185 kgf*cm, 13 ft.*lbf }
3. Connect the parking brake switch connector.
ADJUST REAR DRUM BRAKE SHOE CLEARANCE (REAR WHEEL PARKING BRAKE)
1. Remove the shoe adjusting hole plug from the backing plate.
2. Using a screwdriver, turn the adjusting nut until the wheel locks.
3. Turn the adjusting nut in opposite direction and make the shoe shrink to so that the drum can rotate easily. (w/ Automatic adjuster)
4. Text in Illustration
  
  *a Expand
  
  *b Contract
  
  Turn the adjusting nut until the wheel turns freely. (w/o Automatic adjuster)
  
  Standard number of notches to be backed off
  
  5 notches
5. Install the shoe adjusting hole plug to the backing plate.
ADJUST PARKING BRAKE SHOE CLEARANCE (CENTER PARKING BRAKE)
1. Turn the shoe adjuster counterclockwise until the brake shoes are fully expanded.
2. Text in Illustration
  
  *a Contracted
  
  Turn the shoe adjuster clockwise 1 notch.
3. With the parking brake pulled its full distance, check that the drum is locked.
4. Release the parking brake lever and ensure that the parking brake is not dragging.
  
  Tech Tips
  
  If it is dragging, turn the shoe adjuster clockwise another notch.
INSPECT AND ADJUST PARKING BRAKE LEVER TRAVEL
1. Pull the parking brake lever all the way up, and count the number of clicks at 250 N (25kgf, 55 lbf).
  
  Center parking brake
  
  6 - 8 clicks
  
  Rear wheel parking brake
  
  4 - 6 clicks
2. If incorrect, adjust the parking brake.
INSTALL PARKING BRAKE HOLE COVER
INSTALL SHIFT LEVER HOLE COVER
INSTALL SHIFTING HOLE COVER SUB-ASSEMBLY
INSTALL FLOOR SHIFT SHIFT LEVER KNOB SUB-ASSEMBLY

Text in Illustration
*a	Expand
*b	Contract