5L VANE PUMP DISASSEMBLY


  1. REMOVE POWER STEERING SUCTION PORT UNION


    1. Remove the bolt and suction port union.

    2. Remove the O-ring from the suction port union.

  2. REMOVE PRESSURE PORT UNION


    1. Remove the pressure port union.

    2. Remove the O-ring from the pressure port union.

    3. Remove the flow control valve.

    4. Remove the flow control valve compression spring.

  3. REMOVE VANE PUMP HOUSING REAR


    1. Remove the 4 bolts and pump housing rear from the pump housing front.

    2. Remove the gasket.

    3. Remove the 2 O-rings from the pump housing rear.

  4. REMOVE VANE PUMP SIDE PLATE REAR


    1. Remove the wave washer from the side plate rear.

    2. Remove the side plate rear.

  5. REMOVE VANE PUMP CAM RING

  6. REMOVE VANE PUMP ROTOR

    A01KEKY

    1. Remove the 10 vane plates from the vane pump rotor.

    2. Using a screwdriver, remove the snap ring from the vane pump shaft.

    3. Remove the vane pump rotor.

  7. REMOVE VANE PUMP SHAFT

  8. REMOVE VANE PUMP HOUSING OIL SEAL

    A01KEPW

    1. Using a screwdriver, remove the oil seal.

      Note

      Be careful not to damage the pump housing front.