BRAKE BOOSTER REMOVAL


  1. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  2. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY

    Click here

  3. REMOVE BRAKE PEDAL BRACKET ASSEMBLY


    1. Remove the 3 clutch pedal bracket mount bolts.

    2. Remove the 3 bolts and airbag sensor assembly. (w/ Airbag)

    3. Remove the bolt and turn signal flasher. (RHD STEERING POSITION TYPE)

    4. Remove the check connector. (RHD STEERING POSITION TYPE)

    5. Disconnect the brake tube clamp.

    6. Disconnect the vacuum hose.

    7. A01KGLD

      Remove the 2 bolts, 2 nuts and brake pedal bracket assembly.

  4. REMOVE BRAKE BOOSTER ASSEMBLY


    1. Remove the clip and master cylinder push rod pin.

    2. Remove the push rod clevis and lock nut.

    3. Remove the 4 nuts and pull out the brake booster.