REAR SPEED SENSOR INSTALLATION


  1. INSTALL SKID CONTROL SENSOR WIRE (DOUBLE TIRE TYPE)


    1. Connect the resin clips and install the harness clamp bolts to the frame and housing.

      Torque:
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

    2. Connect the sensor connector.

  2. INSTALL SPEED SENSOR REAR LH (DOUBLE TIRE TYPE)


    1. Install the speed sensor with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Connect the sensor connector.

  3. INSTALL SPEED SENSOR REAR LH (SINGLE TIRE TYPE)


    1. Install the speed sensor with the bolt.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    2. Install the 2 bolts and resin clamp or 2 resin clamps to the frame and housing.

      Torque:
      18 N*m  { 185 kgf*cm, 13 ft.*lbf }

    3. Connect the sensor connector.

  4. CHECK ABS SPEED SENSOR SIGNAL

    Click here