REAR SPEED SENSOR REMOVAL


  1. REMOVE SPEED SENSOR REAR LH (SINGLE TIRE TYPE)


    1. Disconnect the sensor connector.

    2. Remove the 2 clamp bolts and resin clamp (Normal tread) or 2 resin clamps (Wide tread) from the frame and housing.

    3. A01KIBI

      Remove the bolt and speed sensor.

      Note

      Do not stick any foreign matter on the sensor tip.

  2. REMOVE SPEED SENSOR REAR LH (DOUBLE TIRE TYPE)


    1. Disconnect sensor connector.

    2. Remove the bolt and speed sensor.

      Note

      Do not stick any foreign matter on the sensor tip.

  3. REMOVE SKID CONTROL SENSOR WIRE (DOUBLE TIRE TYPE)


    1. Disconnect sensor connector.

    2. Disconnect the resin clips and remove the harness clamp bolts from the frame and housing.