FRONT BRAKE REASSEMBLY


  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG


    1. Temporarily tighten bleeder plug and install the bleeder plug cap.

  2. INSTALL FRONT DISC BRAKE CYLINDER MOUNTING LH (INDEPENDENT FRONT SUSPENSION)


    1. Install the disc brake cylinder mounting LH with the 2 bolts.

      Torque:
      147 N*m  { 1500 kgf*cm, 108 ft.*lbf }

  3. INSTALL FRONT DISC BRAKE CYLINDER MOUNTING LH (RIGID FRONT SUSPENSION)


    1. Install the disc brake cylinder mounting LH with the 3 bolts.

      Torque:
      147 N*m  { 1500 kgf*cm, 108 ft.*lbf }

  4. INSTALL PISTON SEAL


    1. Apply the lithium soap base glycol grease to a new piston seal.

    2. Install the piston seal to the disc brake cylinder.

  5. INSTALL FRONT DISC BRAKE PISTON


    1. Apply the lithium soap base glycol grease to the piston.

    2. Install the piston to the disc brake cylinder.

      Note

      Do not screw the piston forcedly in the disc brake cylinder.

  6. INSTALL CYLINDER BOOT


    1. Apply the lithium soap base glycol grease to a new cylinder boot. Install the cylinder boot to the disc brake cylinder.

      Tech Tips

      Install the boot securely to the grooves of the cylinder and piston.

    2. Using a screwdriver, install the set ring.

      Note

      Do not damage the cylinder boot.