TIRE AND WHEEL SYSTEM INSPECTION


  1. INSPECT TIRES


    1. Check the tires for wear and proper inflation pressure.

      Cold the inflation pressure
      Rear single tire vehicle
      Model

      Front, Rear

      Tire size

      Front, Rear Pressure

      kPa (kgf/cm2, psi)
      KDY220L-TBMDYW(3)

      195/70R15C 104/102S

      195/70R15C 104/102S

      450 (4.5, 65)

      450 ( 4.5, 65)
      KDY220R-TBMDYW
      KDY230L-PSMBYW(3)
      LY220R-TBMDSQ3
      LY225R-TBMDS

      600R15-8PR

      700R15-8PR

      450 (4.5, 65)

      400 (4.0, 58)
      LY225R-TBMDS3
      LY225L-TBMDS
      LY225L-TBMDS3
      LY235R-TBMFS

      600R15-8PR

      700R15-10PR

      450 (4.5, 65)

      525 (5.25, 76)
      LY235R-TBMFS3
      LY235L-TBMFS
      LY235L-TBMFS3
      Rear double tire vehicle
      Model

      Front, Rear

      Tire size

      Front, Rear Pressure

      kPa (kgf/cm2, psi)
      KDY230R-TBMGYW3

      195/70R15C 104/102S

      195/70R15C 104/102S

      450 (4.5, 65)

      350 ( 3.5, 51)
      KDY230L-TBMGYW3
      KDY230L-PBMEYW3
      KDY250R-TBMGYW3
      KDY250L-TBMGYW3
      KDY250L-PBMEYW3
      KDY260L-TBMGYW3
      KDY260L-PBMEYW3
      LY230R-TBMGSQ3
      LY230R-TBMGSN3
      LY235R-TLMGS

      175R14-8PR

      155R12-8PR

      450 (4.5, 65)

      450 (4.5, 65)
      LY235R-TLMKS

      185R14-8PR

      155R12-8PR

      450 (4.5, 65)

      450 (4.5, 65)
    2. A01KEU4

      Using a dial indicator, check the tire runout.

      Tire runout
      3.0 mm (0.039 in.) or less

  2. ROTATE TIRE

    A01KF3A

    1. Rear single tire vehicle:


      1. In case that the size, tread pattern or the number of pry is same between the front wheel and the rear wheel.

      2. A01KI2R

        In case that the size, tread pattern or the number of pry is different between the front wheel and the rear wheel.

    2. A01KGZR

      Rear double tire vehicle:


      1. In case that the size, tread pattern or the number of pry is same between the front wheel and the rear wheel.

      2. A01KEES

        In case that the size, tread pattern or the number of pry is different between the front wheel and the rear wheel.

  3. INSPECT WHEEL BALANCE

    A01KETB

    1. Check and adjust the Off-the-car balance.

    2. If necessary, check and adjust the On-the-car balance.

      Imbalance after adjustment
      15 g (0.033 lb) or less

  4. INSPECT BEARING BACKLASH (RIGID FRONT SUSPENSION)

    Click here

  5. INSPECT AXLE HUB AXIAL PLAY (JUST LOW (DOUBLE TIRE))

    Click here

  6. INSPECT AXLE HUB AXIAL PLAY (FULL JUST LOW)

    Click here