FRONT LOWER SUSPENSION ARM INSTALLATION

INSTALL LOWER ARM BUSH
1. Using SST and a press, install the lower arm bush (front).
  
  SST
  
  09710-22021   ( 09710-01071 )
  
  09710-30021   ( 09710-03091 )
  
  09950-60010   ( 09951-00560 )
2. Using SST and a press, install the lower arm bush (rear).
  
  SST
  
  09710-26010 ( 09710-05071, 09710-05081 )
  
  09950-60020 ( 09951-00810 )
TEMPORARILY TIGHTEN FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH
Text in Illustration

*a Matchmark
1. Install the front suspension lower arm No. 1 LH, front suspension toe adjust cam assembly, front suspension toe adjust plate No. 2, camber adjust cam assembly, camber adjust cam No. 2 and washer, temporarily tighten bolt and nut.
CONNECT LOWER BALL JOINT ASSEMBLY FRONT LH
1. Support the front suspension lower arm No. 1 LH with a jack, connect the front suspension lower arm No. 1 LH to the steering knuckle.
2. Install new castle nut to the steering knuckle.
  
  Torque:
  
  140 N*m { 1428 kgf*cm, 103 ft.*lbf }
3. Install new cotter pin.
CONNECT STABILIZER BAR FRONT
1. Install the bolt 4 bolts and connect the stabilizer bar front.
  
  Torque:
  
  24 N*m { 245 kgf*cm, 18 ft.*lbf }
TEMPORARILY TIGHTEN SHOCK ABSORBER ASSEMBLY FRONT LH
1. Install the front shock absorber assembly LH and bolt, temporarily tighten the nut.
STABILIZE SUSPENSION
1. Install the front wheel and jack down the vehicle.
  
  Torque:
  
  Full just low
  
  365 N*m { 3722 kgf*cm, 269 ft.*lbf }
  
  Except full just low
  
  135 N*m { 1377 kgf*cm, 100 ft.*lbf }
2. Bounce the vehicle up and down several times to stabilize the suspension.
FULLY TIGHTEN FRONT SUSPENSION ARM SUB-ASSEMBLY LOWER NO.1 LH
1. Fully tighten the bolt and nut.
  
  Torque:
  
  170 N*m { 1734 kgf*cm, 125 ft.*lbf }
FULLY TIGHTEN SHOCK ABSORBER ASSEMBLY FRONT LH
1. Fully tighten the nut.
  
  Torque:
  
  105 N*m { 1071 kgf*cm, 77 ft.*lbf }
ADJUST FRONT WHEEL ALIGNMENT

Click here