DIFFERENTIAL CARRIER ASSEMBLY (for Ring Gear Size 10.5 inch) INSPECTION


  1. INSPECT DIFFERENTIAL PINION AND SIDE GEAR


    1. Check that no damage is identified on the differential pinion and differential side gear. If the differential pinion and/or differential side gear is damaged, replace the differential.

  2. INSPECT DIFFERENTIAL CASE


    1. Check that no damaged is differential case. If the differential case is damaged, replace the differential case.

  3. INSPECT DIFFERENTIAL CASE ASSEMBLY RUNOUT

    A01KEXA

    Tech Tips

    It will be done only when it exceeds the limit at the ring gear runout check.


    1. Install the rear differential case bearing to the differential case.

    2. Install the differential case to the differential carrier.

    3. Install the rear differential cap and 4 bolts to the differential carrier.

      Torque:
      196 N*m  { 2000 kgf*cm, 146 ft.*lbf }

    4. Inspect the differential case runout.

      Maximum runout
      0.05 mm (0.002 in.)

    5. Remove the differential case.

    6. Remove the rear differential case bearing.