DIFFERENTIAL CARRIER ASSEMBLY (for Ring Gear Size 9.5 inch) INSPECTION

INSPECT DIFFERENTIAL PINION AND SIDE GEAR

1. Check that no damage is identified on the differential pinion and differential side gear. If the differential pinion and/or differential side gear is damaged, replace the differential.

INSPECT DIFFERENTIAL CASE

1. Check that no damaged is differential case. If the differential case is damaged, replace the differential case.

INSPECT RUNOUT OF REAR DIFFERENTIAL CASE SUB-ASSEMBLY

Tech Tips

It will be done only when it exceeds the limit at the ring gear runout check.

1. Install the rear differential case bearing to the differential case.

2. Install the differential case to the differential carrier.

3. Install the baring cap and 4 bolts to the differential carrier.

   Torque:

   83 N*m  { 846 kgf*cm, 61 ft.*lbf }

4. Inspect the differential case runout.

   Maximum runout
   0.02 mm (0.0008 in.)

5. Remove the differential case.

6. Remove the rear differential case bearing.

REMOVE REAR DIFFERENTIAL DUST DEFLECTOR