PROPELLER SHAFT ASSEMBLY (for 2 Joint Type) INSTALLATION


  1. INSTALL PROPELLER SHAFT ASSEMBLY REAR (YOKE SLIDE TYPE PROPELLER SHAFT)

    A01KHQNE01

    1. Remove the SST from the extension housing.

      SST
      09325-20010

    2. Install propeller shaft in the extension housing.

    3. A01KEWLE01
      Text in Illustration
      *a Matchmark

      Align the matchmarks on the yoke and differential flange.

    4. Install the 4 bolts, 4 nuts and washer.

      Torque:
      74 N*m  { 755 kgf*cm, 55 ft.*lbf }

  2. INSTALL PROPELLER SHAFT ASSEMBLY REAR (CENTER SLIDE TYPE PROPELLER SHAFT)

    A01KFCEE01
    Text in Illustration
    *a Matchmark

    1. Align the matchmarks on the yoke and parking brake down or flange.

    2. Install the 4 bolts, 4 nuts and 4 washers.

      Torque:
      Bolt size M 10
      74 N*m  { 755 kgf*cm, 55 ft.*lbf }
      Bolt size M 11
      88 N*m  { 897 kgf*cm, 65 ft.*lbf }
    3. A01KEWLE01
      Text in Illustration
      *a Matchmark

      Align the matchmarks on the yoke and differential flange.

    4. Install the 4 bolts, 4 nuts and 4 washers.

      Torque:
      Bolt size M 10
      74 N*m  { 755 kgf*cm, 55 ft.*lbf }
      Bolt size M 11
      88 N*m  { 897 kgf*cm, 65 ft.*lbf }