INPUT SHAFT INSPECTION


  1. INSPECT NO. 2 SYNCHRONIZER RING


    1. A01KG3C

      Apply gear oil to the cone of the input shaft, and check that it does not turn in either direction while pushing the No. 2 synchronizer ring.

      If it turns, replace the synchronizer ring.

    2. A01KGFK

      Check the clearance between the No. 2 synchronizer ring and input shaft while pushing the No. 2 synchronizer ring against the cone of the input shaft.

      Standard clearance
      0.70 to 1.70 mm (0.0276 to 0.0669 in.)

      If the clearance is not within the specified values, replace the No. 2 synchronizer ring with a new one.