MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL INSTALLATION


  1. INSTALL MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A01KHD8E01

      Using SST and a hammer, install a new oil seal to the extension housing.

      SST
      09325-20010
      Drive in depth
      - 0.5 to 0.5 mm (-0.020 to 0.020 in.)

    2. Coat the lip of the oil seal with MP grease.

  2. INSTALL PROPELLER SHAFT ASSEMBLY

    A01KH7QE01

    1. Remove SST from the extension housing.

    2. Install the propeller shaft assembly in the extension housing.

    3. A01KI9TE02
      Text in Illustration
      *a Matchmark

      Align the matchmarks on the propeller shaft flange and differential flange.

    4. Install the 4 nuts, 4 bolts and 4 washers.

      Torque:
      74 N*m  { 749 kgf*cm, 54 ft.*lbf }

  3. ADD MANUAL TRANSMISSION OIL

  4. INSPECT AND ADJUST MANUAL TRANSMISSION OIL

    Click here