MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL REMOVAL


  1. DRAIN MANUAL TRANSMISSION OIL


    1. Remove the filler plug and gasket.

    2. Remove the drain plug and gasket, and drain the oil.

    3. Install the drain plug with a new gasket.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  2. REMOVE PROPELLER SHAFT ASSEMBLY

    A01KI9TE02

    1. Place matchmarks on the propeller shaft flange and differential flange.

      Text in Illustration
      *a Matchmark

    2. Remove the 4 nuts, 4 bolts and 4 washers.

    3. Remove the propeller shaft assembly.

    4. A01KH7QE01

      Insert SST into the extension housing to prevent oil leakage.

      Note

      Do not damage the oil seal.


      1. Use the following SST for the R351 manual transmission.

        SST
        09325-40010

      2. Use the following SST for the G54 manual transmission.

        SST
        09325-20010

  3. REMOVE MANUAL TRANSMISSION EXTENSION HOUSING OIL SEAL


    1. A01KFV4E01

      Using SST, remove the oil seal.

      SST
      09308-00010