SHIFT LEVER ASSEMBLY REASSEMBLY


  1. INSTALL CONTROL SHIFT LEVER RETAINER NO.1 GROMMET


    1. A01KHNC

      Install the 4 bushes and 4 new grommets to the shift lever retainer.

  2. INSTALL SELECTING BELLCRANK


    1. A01KG45E01

      Apply MP grease to outside of the collar.

      Text in Illustration
      A01KFFI MP grease

    2. Install the selecting bellcrank to the shift lever retainer with the bolt and nut.

      Torque:
      12 N*m  { 120 kgf*cm, 9 ft.*lbf }

  3. INSTALL FLOOR SHIFT NO.1 BUSH


    1. A01KI0EE03

      Apply MP grease to inside and outside of a new bush.

      Text in Illustration
      A01KFFI MP grease

    2. Install a new cushion and new bush to the select lever.

  4. INSTALL SELECT LEVER TORSION SPRING


    1. A01KI5VE01

      Apply MP grease to the torsion spring.

      Text in Illustration
      A01KFFI MP grease

    2. Install the torsion spring to the select lever.

  5. INSTALL SELECT LEVER COLLAR


    1. A01KGZPE02

      Apply MP grease to outside of the collar.

      Text in Illustration
      A01KFFI MP grease

    2. Apply MP grease to both side of 2 new bushes.

    3. Install the collar and 2 new bushes to the select lever.

  6. INSTALL FLOOR SHIFT SHIFT LEVER SUB-ASSEMBLY


    1. A01KEDW

      Install the shift lever to the select lever with the shift lever bolt and nut.

      Torque:
      14.5 N*m  { 145 kgf*cm, 11 ft.*lbf }
    2. A01KFUW

      Apply MP grease to outside of the shift lever bolt.

      Text in Illustration
      A01KFFI MP grease

  7. INSTALL FLOOR SHIFT CONTROL SHIFT LEVER RETAINER SUB-ASSEMBLY


    1. A01KHRLE03

      Apply MP grease to inside and outside of a new bush.

      Text in Illustration
      A01KFFI MP grease

    2. Install a new bush to the shift lever retainer.

    3. A01KFG4

      Install the shift lever retainer with the shift lever bolt and nut.

  8. INSTALL FLOOR SHIFT CONTROL LEVER STOPPER


    1. A01KIME

      Using snap ring pliers, install the snap ring to the control lever stopper.

    2. Install the washer to the control lever stopper.

    3. A01KFD0

      Install the control lever stopper with the 2 bolts.

      Torque:
      5.0 N*m  { 50 kgf*cm, 44 in.*lbf }