SHIFT AND SELECT LEVER SHAFT ASSEMBLY DISASSEMBLY


  1. REMOVE SELECT OUTER LEVER LOCK PIN


    1. A01KG4P

      Loosen the nut of the select outer lever lock pin until the top of the nut becomes flush with the end of the lock pin.

    2. A01KGAR

      Using a brass bar and a hammer, disengage the select outer lever lock pin.

    3. Remove the nut, washer and select outer lever lock pin from the shift lever shaft housing assembly.

  2. REMOVE SELECT OUTER LEVER


    1. A01KHPV

      Remove the select outer lever and washer from the select lever shaft.

  3. REMOVE SELECT LEVER SHAFT


    1. A01KG11

      Remove the select lever shaft from the shift lever shaft housing.

  4. REMOVE NO. 2 LEVER LOCK PIN


    1. A01KERB

      Loosen the nut of the No. 2 lever lock pin until the top of the nut becomes flush with the end of the lock pin.

    2. A01KGKF

      Using a brass bar and a hammer, disengage the No. 2 lever lock pin .

    3. Remove the nut, washer and No. 2 lever lock pin from the shift lever shaft housing assembly.

  5. REMOVE NO. 1 SHIFT OUTER LEVER


    1. A01KF4P

      Remove the No. 1 shift outer lever from the shift and select lever shaft.

  6. REMOVE SHIFT LEVER BOOT


    1. A01KGX5

      Remove the shift lever boot from the shift lever shaft housing.

  7. REMOVE SHIFT AND SELECT LEVER SHAFT


    1. A01KGS8

      Using a pin punch (5 mm) and a hammer, remove the shift lever shaft set slotted pin.

      Note

      Be careful not to damage the shift and select lever.

    2. A01KHBZE01

      Pull out the shift and select lever shaft from the shift lever shaft housing.

  8. REMOVE SHIFT AND SELECT LEVER


    1. A01KEH9

      Remove the shift and select lever, No. 1 select spring seat and 2 springs from the shift lever shaft housing.

  9. REMOVE REVERSE RESTRICT PIN SLOTTED SPRING PIN


    1. A01KHY8

      Using a hammer, drive a screw extractor into the reverse restrict pin slotted spring pin.

    2. Pull out the reverse restrict pin slotted spring pin from the shift lever shaft housing.

  10. REMOVE NO. 1 REVERSE RESTRICT PIN


    1. A01KHJ9

      Remove the No. 1 reverse restrict pin and compression spring from the shift lever shaft housing.

    2. Remove the compression spring from the No. 1 reverse restrict pin.

  11. REMOVE SHIFT LEVER NO.2 SHAFT OIL SEAL


    1. A01KIGH

      Using a screwdriver with its tip taped, remove the shift lever No. 2 shaft oil seal from the shift lever shaft housing.

      Note

      Be careful not to damage the shift lever shaft housing.

  12. REMOVE SHIFT LEVER SHAFT OIL SEAL


    1. A01KFIV

      Using a screwdriver with its tip taped, remove the shift lever shaft oil seal from the shift lever shaft housing.

      Note

      Be careful not to damage the shift lever shaft housing.