COUNTER GEAR REASSEMBLY


  1. INSTALL COUNTER GEAR FRONT BEARING


    1. A01KHREE04

      Using SST and a press, install the counter gear front bearing onto the counter gear.

      SST
      09515-10010

      Install it so that the snap ring groove of the bearing faces to the front side.

  2. INSTALL COUNTER GEAR FRONT BEARING NO. 2 SNAP RING


    1. A01KEX1

      Select the correct counter gear front bearing No. 2 snap ring so that the clearance between the counter gear and counter gear front bearing No. 2 snap ring is within the specified values. Using a brass bar and a hammer, install it onto the counter gear.

      Standard clearance
      0.1 mm (0.0039 in.) or less
      Mark Thickness mm (in.)
      A 2.05 to 2.10 mm (0.0807 to 0.0827 in.)
      B 2.10 to 2.15 mm (0.0827 to 0.0846 in.)
      C 2.15 to 2.20 mm (0.0846 to 0.0866 in.)
      D 2.20 to 2.25 mm (0.0866 to 0.0886 in.)
      E 2.25 to 2.30 mm (0.0886 to 0.0906 in.)
      F 2.30 to 2.35 mm (0.0906 to 0.0925 in.)