CLUTCH MASTER CYLINDER REMOVAL


  1. DRAIN CLUTCH FLUID

  2. REMOVE AIR DUCT NO.1 (RHD STEERING POSITION TYPE)


    1. Remove the 2 clips and the air duct.

  3. SEPARATE CLUTCH MASTER CYLINDER TO 2 WAY TUBE


    1. A01KGWY

      Using a union nut wrench, disconnect the tube.

    2. Separate the clutch reservoir tube from the clutch master cylinder.

      Tech Tips

      Use a container to catch the fluid.

  4. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS W/HOLE PIN


    1. A01KHXX

      Remove the clip and the hole pin.

    2. Disconnect the clevis from the clutch pedal.

  5. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


    1. A01KHNV

      Remove the 2 bolts and the clutch master cylinder assembly.