STARTER (for 2.2 kW Type) REMOVAL


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE REAR DOOR SCUFF PLATE LH (for Double Cab)

    A01KF1Z

    1. Remove the 3 screws and rear door scuff plate.

  3. REMOVE REAR DOOR SCUFF PLATE RH (for Double Cab)

    A01KINS

    1. Remove the 3 screws and rear door scuff plate.

  4. REMOVE REAR FLOOR MAT (for Double Cab)

  5. REMOVE NO. 4 MAT SET PLATE (for Double Cab)

    A01KGPT

    1. Remove the 6 screws and mat set plate.

  6. REMOVE TRANSMISSION SERVICE HOLE COVER SUB-ASSEMBLY (for Double Cab)

    A01KIQM

    1. Remove the 12 bolts and service hole cover.

  7. REMOVE STARTER


    1. A01KGB5

      Disconnect the connector.

    2. Open the terminal cap.

    3. Remove the nut and disconnect the wire harness.

    4. A01KG0T

      Remove the bolt and nut and remove the starter.