OIL LEVEL SENSOR INSTALLATION


  1. INSTALL ENGINE OIL LEVEL SENSOR


    1. Install a new gasket to the engine oil level sensor.

    2. Install the engine oil level sensor with the 4 bolts.

      Torque:
      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

    3. Connect the engine oil level sensor connector.

  2. ADD ENGINE OIL


    1. Add fresh oil and install the oil filler cap.

      Engine oil
      Item Oil Grade Oil Viscosity (SAE)
      w/ DPF

      • ACEA C2

      (Using engine oil other than ACEA C2 may damage catalytic converter)

      • 0W-30

      • 5W-30
      w/o DPF

      • G-DLD1, API CF-4, CF or ACEA B1

      • 5W-30


      • 10W-30


      • 15W-40


      • 20W-50
      Capacity
      Item Fill Amount
      Drain and refill with oil filter change 7.0 liters (7.4 US qts, 6.2 Imp. qts)
      Drain and refill without oil filter change 6.8 liters (7.2 US qts, 6.0 Imp. qts)
      Dry fill 7.7 liters (8.1 US qts, 6.8 Imp. qts)

  3. INSPECT FOR OIL LEAK


    1. Warm up the engine and inspect for oil leak.

  4. INSPECT ENGINE OIL LEVEL


    1. Warm up the engine, stop the engine and wait 5 minutes. The engine oil level should be between the dipstick low level mark and full level mark.

      If low, check for leakage and add oil up to the full level mark.

      Note

      Do not fill engine oil above the full level mark.