OIL LEVEL SENSOR REMOVAL


  1. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the drain plug from the oil pan and drain the engine oil into a container.

    3. Clean the drain plug.

    4. Install the drain plug with a new gasket.

      Torque:
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }

  2. REMOVE ENGINE OIL LEVEL SENSOR


    1. A01KI82

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts and engine oil level sensor.

    3. Remove the gasket from the engine oil level sensor.