OIL PRESSURE SENSOR (w/ DPF) REMOVAL


  1. REMOVE ENGINE SERVICE HOLE SUB COVER SUB-ASSEMBLY (for Double Cab)

    Click here

  2. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the drain plug from the oil pan and drain the engine oil into a container.

    3. Clean the drain plug.

    4. Install the drain plug with a new gasket.

      Torque:
      34 N*m  { 347 kgf*cm, 25 ft.*lbf }

  3. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY


    1. Disconnect the engine oil pressure sender gauge connector.

    2. A01KHPB

      Using a 27 mm deep socket wrench, remove the oil pressure sender gauge.