OIL PUMP REASSEMBLY

INSTALL OIL PUMP DRIVE GEAR

1. 

   Text in Illustration

   *a

   Mark

   Place the timing belt case on wooden blocks (See step Click here).

   Note

   Be careful not to damage the timing pointer.

2. Insert the drive and driven rotors into timing belt case with the marks facing the oil pump cover side.

3. 

   Text in Illustration

   *1

   Adhesive

   Apply adhesive to 2 or 3 threads of the screws.

   Adhesive
   Toyota Genuine Adhesive 1344, Three Bond 1344 or Equivalent

4. Install the oil pump cover with the 8 screws.

   Torque:

   10 N*m  { 105 kgf*cm, 7 ft.*lbf }

INSTALL OIL PUMP RELIEF VALVE

1. Insert the relief valve and spring into the installation hole of the timing belt case.

2. 

   Text in Illustration

   *1	12 mm Hexagon Wrench

   Using a 12 mm hexagon wrench, install a new gasket and the plug.

   Torque:

   37 N*m  { 375 kgf*cm, 27 ft.*lbf }