DIFFERENTIAL PRESSURE SENSOR (w/ DPF) INSTALLATION


  1. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY


    1. Install the differential pressure sensor with the nut.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    2. Connect the differential pressure sensor connector.

    3. A01KGIKE01
      Text in Illustration
      *a Marking
      *b Paint Mark

      Install the 2 exhaust pipe air hoses with the 2 new clips.

      Tech Tips

      Connect the air hoses so that the paint marks of the exhaust air hoses are as shown in the illustration.

  2. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here