EXHAUST FUEL ADDITION INJECTOR (w/ DPF) INSPECTION


  1. INSPECT EXHAUST FUEL ADDITION INJECTOR ASSEMBLY


    1. A01KFPFE03
      Text in Illustration
      *a

      Component without harness connected

      (Exhaust Fuel Addition Injector Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - 2 20 °C 7.1 to 7.9 Ω

      Tech Tips

      The temperature indicated under "Condition" is the temperature of the exhaust fuel addition injector assembly.

      If the result is not as specified, replace the exhaust fuel addition injector assembly.